Roughstack V2 is a tube mod hand crafted out of aircraft grade aluminum in the USA. Version 2 has easier to screw threads compared to the first version. Because of this the two versions are not compatible with each other. It runs on either one 18350 (3.7V) battery or one 16340 (3.7V) battery and uses 510 atomizers.

Made in	USA
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aircraft aluminum
Solderless/wireless	N/A (Tell us)
Button placement	Top
Supplier(s)	Cigtechs
Video(s)	N/A (Tell us)

Read more about this mod >>

Goldrush is an acrylic tube mod by Cigtechs. It runs on either one 18650 battery (3.7V), two 16340 (6V) or two 18350 (7.2V) batteries and uses 510 atomizers. You could call this the big brother to the Blue Lightning.

Made in	USA
Manufacturer	Cigtechs
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Cigtechs
Video(s)	N/A (Tell us)

Read more about this mod >>

The Empire MOD is the first custom device by Empire Mods. This all mechanical mod is made in the USA. The design goes hand in hand with the same companys drip shield. In fact the drip shields were originally designed to be used with this device. By adjusting the height of the center tube you can use almost any single battery with the Empire from 16340 to 18650. Has threading for 901 atomizers but comes with a 510 adapter. Also features a switch locking function, interchangeable anodized color sleeves, venting holes and custom made Delrin stand (Tranquility Base).

Made in	USA
Manufacturer	Empire Mods
Dimensions	N/A (Tell us)
Weight	43g
Material	20/24 Aircraft aluminum
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Empire Mods
Video(s)	N/A (Tell us)

Read more about this mod >>

C Squared by ePipeMods is claimed to be the worlds smallest wooden box mod. They say it’s a “more affordable version of their single battery pipes”. C Squared runs on one 16340 or 18350 (3.7V) battery and uses 510 atomizers. There is also a slightly larger high voltage version available which uses two of the batteries mentioned above or a single 18650 battery.

Made in	USA
Manufacturer	ePipeMods
Dimensions	2″ x 1-1/4″
Weight	N/A (Tell us)
Material	Wood
Solderless/wireless	N/A (Tell us)
Button placement	Top
Supplier(s)	ePipeMods
Video(s)	N/A (Tell us)

Read more about this mod >>

Artisan is a hand-made wooden box mod by Southpaw Modifications. Artisan comes with bottom juice feeding system.

Made in	USA
Manufacturer	Southpaw Modifications
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Wood
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Southpaw Modifications
Video(s)	N/A (Tell us)

Read more about this mod >>

Q2V3 Copper is the new model for 2011. It’s slightly larger than the previous models using a 17670 (3.7V) battery or two 16340 batteries (6V). Even though it’s longer than the original Hex copper it doesn’t carry as much weight. Q2V3 is the most comfortable Copper yet due to its rounded quadratic end caps and softly textured body.

Made in	USA
Manufacturer	VaporAlley
Dimensions	4″ x 1″
Weight	4.1oz
Material	Brass
Solderless/wireless	Yes
Button placement	Top (Activated by pressing the atomizer down)
Supplier(s)	VaporAlley
Video(s)	N/A (Tell us)

Continue reading »

The Bent Pipe from ePipeMods is the first USA made electronic pipe. Each pipe is a unique, handcarved work of art. Each pipe is teak oiled and wax polished for a beautiful finish. The Pipes operate with one 18350 or 16340 battery at 3.7 Volts. Compatible with 510 threaded atomizers. There are literally dozens of different designs to choose from.

Made in	USA
Manufacturer	ePipeMods
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Wood
Solderless/wireless	N/A (Tell us)
Button placement	Top
Supplier(s)	ePipeMods
Video(s)	N/A (Tell us)

Read more about this mod >>

Grip is a ergonomical less boxy shape box mod. Made out of real wood and finished with Tung oil. You can choose a standard (index finger) or reversed (thumb) button placement. The type of wood can also be chosen by the customer. Variable voltage and Juice feeder versions should be available soon.

Made in	USA
Manufacturer	SweetVapes
Dimensions	N/A (Tell us)
Weight	8oz
Material	Wood
Solderless/wireless	No
Button placement	Side
Supplier(s)	SweetVapes
Video(s)	TheStubear62

Read more about this mod >>

Phantom TT Twinbooster is a dual atomizer (510) tube mod. It comes with a custom machined mouthpiece to join the two atomizers. Also features a master on/off switch and the ability to replace the tube to use either a 18650 battery or a smaller 16340 battery. Each unit comes unique numbered.

Made in	Germany
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	No
Button placement	Side
Supplier(s)	Highendsmoke
Video(s)	N/A (Tell us)

Read more about this mod >>

There are three different versions of the Cumulus available. 3.7V, 5V and 6V. 3.7V version uses a single 14500 battery and the high voltage models use two 16340 batteries. 3.7V version is a bit cheaper than the other two. It’s a rather strange looking tube mod but the unit in the picture is just a prototype.

Made in	USA
Manufacturer	N/A (Tell us)
Dimensions	4″
Weight	3oz
Material	N/A (Tell us)
Solderless/wireless	No
Button placement	N/A (Tell us)
Supplier(s)	eCigMods
Video(s)	N/A (Tell us)

Read more about this mod >>

Megalodon or simply “The Don” is a telescoping all mechanical and all aluminum tube mod or “electronic nicotine vaporiser” as they call it. Fully extended it can take a 18650 battery for a full day 3.7V vape.  Other possible single battery possibilities are 18350, 17670, 14650, 16340 and CR123A. If you need higher voltage you can also use two CR123A or 16340 batteries. Theres also a custom 5V battery compatible with the Don available.

Made in	UK
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Moju Republic , Electronicstix
Video(s)	smokejuice

Read more about this mod >>

GGTB (Telescoping Battery Golden Greek) is a smaller and more affordable version of the GGTS. It also has most of the features of it’s predecessor. You can’t adjust the length of the device itself but you can adjust the length of the batteries it accepts with a telescoping dummy battery piece (included). By changing the batteries you can adjust the voltage from 3.7V to 7.4V. Several different finishes are available including aluminum, brass, nickel matte and nickel shiny. The mod has venting holes and a locking button. Compatible batteries: 2 X CR2, 2 X 16340, 2 X 17340, 1 X 14500, 1 X 14650, 1 X 17500, 1 X 17670.

Made in	Greece
Manufacturer	Imeo
Dimensions	3.94″ x 0.75″ (100mm x 19mm)
Weight	2.36oz (67g)
Material	Aluminum
Solderless/wireless	Yes
Button placement	Side
Supplier(s)	GG Ecigs , Vaporkings , e-cigz.co.uk
Video(s)	N/A (Tell us)

Read more about this mod >>

Saber Touch Mini has the same look and safety features as the original Saber Touch but everything comes in a smaller package. According to the manufacturer, the touch sensor functionality has improved since the original version. The Mini version uses one 16340 battery for 3.7 volt vaping. A Protected battery will fit.  The look of the device can be highly customized. You can choose the endcap color and endcap style. You can also provide your own powdercoating material for the manufacturer and get exactly the look you want or choose from the many in stock finishes. You can add a clear top coating or glow-in-the-dark top coating if the powdercoat chosen needs it. Ofcourse, you need to pay extra for some of the options.

Made in	USA (Maryland)
Manufacturer	Vapor Moon
Dimensions	3″ x 1″
Weight	N/A (Tell us)
Material	6061 Aircraft aluminum
Solderless/wireless	N/A (Tell us)
Button placement	Side (Touch plate)
Supplier(s)	Vapor Moon
Video(s)	N/A (Tell us)

Read more about this mod >>

Saber Touch VariVolt has the same look and safety features as the original Saber Touch but with variable voltage feature. Voltage can be adjusted from “low” to 6.5V. The Unit comes with a voltage meter cable (510 connector) and screwdriver keychain for adjusting the voltage. Also the touch sensor button is improved according to the manufacturer. The look of the device can be highly customized. You can choose: endcap threads showing / hidden, endcap color and endcap style. You can also provide your own powdercoating material for the manufacturer and get exactly the look you want or choose from the many in stock finishes. You can add a clear top coating or glow-in-the-dark top coating if the powdercoat chosen needs it. Ofcourse, you need to pay extra for some of the options.

Made in	USA (Maryland)
Manufacturer	Vapor Moon
Dimensions	4 5/8″ x 1″
Weight	N/A (Tell us)
Material	6061 Aircraft aluminum
Solderless/wireless	N/A (Tell us)
Button placement	Side (Touch plate)
Supplier(s)	Vapor Moon
Video(s)	N/A (Tell us)

Read more about this mod >>

Midi Vapestack is the newest mid-sized tube mod from MadVapes. Made out of aircraft grade aluminum. Midi VapeStack comes with a bonus matching aluminum drip tip.

Made in	USA
Manufacturer	MadVapes
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	No
Button placement	Top
Supplier(s)	MadVapes
Video(s)	N/A (Tell us)

Read more about this mod >>

Precise 16340 runs on a single 16340 battery (3.7V). It’s completely machined out of scratch and corrosion resistant stainless steel but optional brass caps are available. Lifetime warranty (except the caps which have a 6 month warranty). Other features include a recessed atomizer connection with a juice well, completely sealed design plus a semi-recessed and shielded button.

Made in	USA
Manufacturer	SuperTManufacturing
Dimensions	2.91″ x 0.73″
Weight	N/A (Tell us)
Material	Stainless steel
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	SuperTManufacturing
Video(s)	N/A (Tell us)

Read more about this mod >>

Galileo is a Italian made mod with very versatile battery and atomizer options. All-aluminum body, telescopic design, will take almost any battery except 10440.  5 Atomizer adaptors included so it can be used with almost any atomizer available. I Can’t quite understand the Italian description but it says something about changing the voltage, my guess is that this is done by changing/stacking the batteries but I might be wrong.

Made in	Italy
Manufacturer	Yasu75
Dimensions	70-104mm x 25mm
Weight	1.59oz (45g)
Material	Aluminum
Solderless/wireless	No/Yes
Button placement	Bottom
Supplier(s)	eSigShop
Video(s)	N/A (Tell us)

Read more about this mod >>

SuperT introduced features that are now used in many e-cig mods. These include adjustable airflow, safety vents (in case of battery failure) and a lockable switch. CR2 batteries can only be used with a add-on sleeve. SuperT was also the slimmest mod using 16340 batteries when it was released.

Read more about this mod >>

Simplified version of the SuperT-mod. Only a very limited amount was ever released.

Read more about this mod >>

Sparkplug SP2 has a completely mechanical tube design. Manufactured and hand assembled in the United States. The Price is hard to beat, full kit with main unit (power regulator), end caps, 901 adapter and atomizer, batteries, charger, 16ml e-liquid and the Thermo extension sleeve for just $25.99. Four body colors to chooce from: black, blue, pink and metallic. Protected batteries do fit and they are recommended ofcourse. Comes with a lifetime warranty (limited) and 30 day money back policy.

Made in	USA
Manufacturer	McDonald-Webb
Dimensions	2 3/4″ X 13/16″
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	McDonald-Webb
Video(s)	N/A (Tell us)

Read more about this mod >>