There are three different versions of the Cumulus available. 3.7V, 5V and 6V. 3.7V version uses a single 14500 battery and the high voltage models use two 16340 batteries. 3.7V version is a bit cheaper than the other two. It’s a rather strange looking tube mod but the unit in the picture is just a prototype.
| Made in | USA |
| Manufacturer | N/A (Tell us) |
| Dimensions | 4″ |
| Weight | 3oz |
| Material | N/A (Tell us) |
| Solderless/wireless | No |
| Button placement | N/A (Tell us) |
| Supplier(s) | eCigMods |
| Video(s) | N/A (Tell us) |
Some really unique (read: strange) passthrough mods here. Some built out of vintage gaming accessories. Not much other information is available and you can barely see anything from the picture(s) provided.
| Made in | N/A (Tell us) |
| Manufacturer | eCigMods.com |
| Dimensions | N/A (Tell us) |
| Weight | N/A (Tell us) |
| Material | N/A (Tell us) |
| Solderless/wireless | No |
| Button placement | Side |
| Supplier(s) | eCigMods.com |
| Video(s) | N/A (Tell us) |
TBH their website is horrible with very little information and stamp size pictures but if you are looking for a basic, affordable box mods you might want to visit them. There are 3.7V and 5V version boxes and they use 14500 batteries, 1 in the 3.7V versions and 2 in the 5V versions.
| Made in | N/A (Tell us) |
| Manufacturer | N/A (Tell us) |
| Dimensions | N/A (Tell us) |
| Weight | N/A (Tell us) |
| Material | N/A (Tell us) |
| Solderless/wireless | No |
| Button placement | Side |
| Supplier(s) | eCigMods.com |
| Video(s) | N/A (Tell us) |
5 Volt vaping with a swivel head. This can be adjusted to any angle. No detailed information is available about the batteries yet and only pre-orders are accepted at the moment.
| Made in | USA |
| Manufacturer | eCigMods.com |
| Dimensions | N/A (Tell us) |
| Weight | N/A (Tell us) |
| Material | N/A (Tell us) |
| Solderless/wireless | N/A (Tell us) |
| Button placement | Top |
| Supplier(s) | eCigMods.com |
| Video(s) | N/A (Tell us) |













