The eCigCity 101 5V box mod runs on two 14500 batteries. Features master on/off switch, short circuit protection, low end voltage cut-off and thermal cut-off safety machanisms.

Made in	UK
Manufacturer	e-CigCity
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Liberty Flights UK
Video(s)	N/A (Tell us)

Continue reading »

Two new affordable box mods by e-CigCity. 510 Big Box runs on one 14500 battery at 3.7 Volts, Baby Box on one 10440 battery. They both use 510 atomizers and have an indicator-led.

Made in	UK
Manufacturer	e-CigCity
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Liberty-Flights UK
Video(s)	N/A (Tell us)

Continue reading »

ARRY by ECigWizard is a 5ml liquid tank. It uses the internals of a CE2 R5 Clearomiser. So you get the exceptional performance of a R5 Clearomizer with a 5ml e-liquid tank. Main body of the ARRY Tank is made of strong 3mm polycarbonate. End caps are made of hard acetel which is also more durable than the more common delrin. You can purchase a tank with or without the internals installed. ARRY Tank can be used with any e-Cigarette mod that has a 510 connection. Use coupon esavuke and save 10%.

Made in	N/A (Tell us)
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Polycarbonate / Acetel
Solderless/wireless	Yes
Button placement	No Button
Supplier(s)	ECigWizard (10% off using coupon esavuke)
Video(s)	N/A (Tell us)

Read more about this mod >>

Megalodon or simply “The Don” is a telescoping all mechanical and all aluminum tube mod or “electronic nicotine vaporiser” as they call it. Fully extended it can take a 18650 battery for a full day 3.7V vape.  Other possible single battery possibilities are 18350, 17670, 14650, 16340 and CR123A. If you need higher voltage you can also use two CR123A or 16340 batteries. Theres also a custom 5V battery compatible with the Don available.

Made in	UK
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Moju Republic , Electronicstix
Video(s)	smokejuice

Read more about this mod >>

USB-passthroughs made completely out of recycled parts.

Made in	UK
Manufacturer	e-CigCity
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	e-CigCity , LF , LF
Video(s)	igetcha69

Continue reading »

e-Cig Box-mods made completely out of recycled parts.

Made in	UK
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	No
Button placement	Side
Supplier(s)	e-CigCity
Video(s)	N/A (Tell us)

Read more about this mod >>

Featuring: Internal auto reset fuse, external safety isolating switch, bottom atomizer feed PDFS (pressure differential feed system) with high capacity bottle, integrated charger (vape while charging), multi-color led. 1x 14500 3.7V battery can also be used.

Made in	UK
Manufacturer	Dave’s Devices
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	No
Button placement	Side
Supplier(s)	Dave’s Devices
Video(s)	N/A (Tell us)

Read more about this mod >>

The very first commercial battery tube mod. Many similarly named and shaped devices have been introduced but this is the original. Three body colours available.

Made in	UK
Manufacturer	Trog
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Bottom
Supplier(s)	Screwdriver , Vaporescence
Video(s)	dumwaldo, GrimmGreen

Read more about this mod >>

Features include: Internal auto reset fuse, external safety isolating switch, easy thumb or finger stealth use, LED multi colour indicator light with freznel lense and recessed atomizer. Available in a range of case colours. Apparently only sold to the UK.

Made in	UK
Manufacturer	Dave’s Devices
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Dave’s Devices
Video(s)	N/A (Tell us)

Read more about this mod >>

Flashlight-mods made completely out of recycled parts. 1 10440 battery will also fit.

Made in	UK
Manufacturer	e-CigCity
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	e-CigCity
Video(s)	light487, cwazydrummerkid

Read more about this mod >>

e-CigCitys latest creation is an affordable mod with 2 voltage options. Led-light color can be chosen and the starter pack comes with everything you need to start using it. Possible battery combinations are 1x 10440 3.7V, 1x 14500 3.7V or 2 x CR2 6V.

Made in	UK
Manufacturer	e-CigCity
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Bottom
Supplier(s)	e-CigCity
Video(s)	garrydibley01, SteveMontuno

Read more about this mod >>

It’s basically the same as the original Little Gem but the switch is on the side rather than on the bottom hence the extra name, sidewinder. Possible battery combinations are 1x 10440 3.7V, 1x 14500 3.7V or 2 x CR2 6V.

Made in	UK
Manufacturer	e-CigCity
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	LF
Video(s)	N/A (Tell us)

Continue reading »

The Mako is one of the first PV’s to be solely designed, engineered, produced and assembled in the UK. The tiny Minno is the smallest of the Mako family. Add-on sleeve can be bought separately to make it a Midi/Maksi. Features include a lockable switch and a adjustable atomizer connection. The New version 2 also has an adjustable switch throw.

Made in	UK
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Moju Republic , ElectroNicStix
Video(s)	smokejuice, svendsen82

Read more about this mod >>

The Mako is one of the first PV’s to be solely designed, engineered, produced and assembled in the UK. Mako Midi is the dual voltage all-rounder. Add-on sleeve can be bought separately to make it a Minno/Maksi. Features include a lockable switch and a adjustable atomizer connection. 2x CR2 batteries can be used for a 6V vape. The New version 2 also has an adjustable switch throw.

Made in	UK
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Moju Republic , ElectroNicStix
Video(s)	smokejuice, svendsen82

Read more about this mod >>

The Mako is one of the first PV’s to be solely designed, engineered, produced and assembled in the UK. Maksi is the “Sweet Spot” Mako. Add-on sleeve can be bought separately to make it a Minno/Midi.Features include a lockable switch and a adjustable atomizer connection. The New version 2 also has an adjustable switch throw.

Made in	UK
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Moju Republic , ElectroNicStix
Video(s)	smokejuice, svendsen82

Read more about this mod >>