Battery Tube Mods

Bauway 510-N is a Chinese basic, three piece desing tube mod using Joye 510 atomizers. It runs on one 18650 battery, regular or high drain. Only sold as a starter kit which includes: 1x 510N main unit, 2x 18650 batteries, 1x charger, 2x 510 atomizers, 5x cartridges.

Made in	China
Manufacturer	Bauway
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	ECigWizard , Vapor Galaxy , VIP e-cig
Video(s)	N/A (Tell us)

Read more about this mod >>

Another Italian all-aluminum mod named “637″ from eSigShop. Designed by Yasu75. Can take either a 510 or a 901 atomizer. Complete list of battery options is as follows: 1x 14500 3.7V, 1x 14650 3.7V, 2x 15270 6V, 2x 15270 7.4V, 2x 15266 6V. Mod name is engraved into the body.

Made in	Italy
Manufacturer	Yasu75
Dimensions	102mm x 20mm
Weight	1.23oz (35g)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Bottom
Supplier(s)	eSigShop
Video(s)	N/A (Tell us)

Read more about this mod >>

A handmade mod named just “999″ from an Italian supplier eSigShop. Units sold now are version 2.1. Design is by Yasu75. Not much information on their website and I could’nt understand much of it anyway.

Made in	Italy
Manufacturer	Yasu75
Dimensions	102mm x 25mm
Weight	99g
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Bottom
Supplier(s)	eSigShop
Video(s)	N/A (Tell us)

Read more about this mod >>

Alloy XL is a sleek and clean compact tube style e-cigarette mod. Made from stainless steel and equipped with a lockable bottom switch. Completely mechanical design. Alloy uses either one 17670 (3.7V) or two RCR123a (6V) batteries.

Made in	N/A (Tell us)
Manufacturer	N/A (Tell us)
Dimensions	4.16″ x .745″
Weight	3.96 oz
Material	Stainless steel
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Ecigsupply
Video(s)	N/A (Tell us)

Read more about this mod >>

Alpha is a smaller, compact version of AltSmokes OmeGa mod. It uses a single 14500 battery for a 3.7V vape. You can use 2x 15270 batteries for a 6V vape but this will void the warranty. Alpha has the same style completely mechanical plunger switch as it’s larger version.

Made in	USA
Manufacturer	AltSmoke
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	6061 Aircraft aluminum
Solderless/wireless	Yes
Button placement	Top
Supplier(s)	AltSmoke
Video(s)	N/A (Tell us)

Read more about this mod >>

The Apex Alpha Ultra is designed, manufactured and assembled in the United States. Compact yet powerful Ultra is the second largest in the Alpha mod line. Alpha Ultra is made from a single block of electroless nickel plated 6061 aircraft aluminum. The completely mechanical switch is the most distinctive feature on this device. There is a inner tube which slides inside the device thus activating the atomizer. Built-in Self Adjusting Adaptive System anables you to use both IMR high drain and protected Li-Ion 14500 batteries without adapters regardless of their specifications. Comes with 10 years warranty (3 years for the switch). Accepts 510 and 306 atomizers from any manufacturer. Buy from Innovapor and use the code “esavuke” for a whopping 20% discount. Price using the coupon is just over $90. Custom aluminum carrying cases, custom made aluminum Tru-Flow driptips, repair parts and a juice feeder called RES (Reservoir Expansion System) also available.

Made in	USA
Manufacturer	Apexvapor
Dimensions	2.94″ (74.75mm) x 0.75″ (19mm)
Weight	N/A (Tell us)
Material	6061 Aircraft aluminum
Solderless/wireless	Yes
Button placement	Side (see description)
Supplier(s)	Innovapor (20% off using coupon esavuke)
Video(s)	N/A (Tell us)

Read more about this mod >>

The Alpha Ultralite by Apex is a 100% American product from design to assembly. Ultralite is the smallest of the three Alpha mods, suitable even for the smallest hand. The Purely mechanical switch is the most distinctive feature on this unit. The switch is actually a second tube inside the device and can be activated by sliding. Large operating surface allows many styles for holding the unit. The battery connector transforms allowing you to use both IMR high drain and protected Li-Ion 10440 batteries without adapters regardless of their specifications. Alpha Ultralite is made from a single piece of electroless nickel plated aircraft grade 6061 aluminum. Accepts 510 and 306 atomizers from any manufacturer. Comes with a 3 year warranty for the switch and 10 years for main parts. Remeber to use our coupon code “esavuke” and get 20% off.

Made in	USA
Manufacturer	Apexvapor
Dimensions	2.78″ (70.61mm) x 0.57″ (14.5mm)
Weight	N/A (Tell us)
Material	6061 Aircraft aluminum
Solderless/wireless	Yes
Button placement	Side (see description)
Supplier(s)	Innovapor (20% off using coupon esavuke)
Video(s)	N/A (Tell us)

Read more about this mod >>

The Apex Alpha UltraMax is designed, manufactured and assembled in the United States. UltraMax is the largest Alpha version using one 17670 battery. UltraMax is made from a single piece of electroless nickel plated aircraft grade 6061 aluminum. The Purely mechanical switch is the most distinctive feature on this unit. The huge switch is recessed into the main body and is activated by sliding. Large operating surface allows many styles for holding the unit. Built-in Self Adjusting Adaptive System allows you to use both IMR high drain and protected Li-Ion 17670 batteries without adapters regardless of their specifications. You can turn the UltraMax into a high voltage device by using two CR123A 3.0V (=6V) batteries. Comes with a 10 year warranty (3 years for the switch). Accepts 510 and 306 atomizers from any manufacturer. You can only buy wholesale amounts from the manufacturer website, check Innovapor for pricing and use the code “esavuke” for a whopping 20% discount. Custom aluminum carrying cases, custom aluminum Tru-Flow driptips, repair parts and a juice feeder called RES (Reservoir Expansion System) also available.

Made in	USA
Manufacturer	Apexvapor
Dimensions	3.63″ (92.25mm) x 0.83″ (21mm)
Weight	N/A (Tell us)
Material	6061 Aircraft aluminum
Solderless/wireless	Yes
Button placement	Side (see description)
Supplier(s)	Innovapor (20% off using coupon esavuke)
Video(s)	N/A (Tell us)

Read more about this mod >>

BB (Black Beauty) is the little brother of the Silver Bullet. Black, purple or pink finish can be chosen. Can be used as a passthrough if a separate add-on is purchased.

Made in	USA
Manufacturer	Altsmoke
Dimensions	3 5/8″ x 3/4″
Weight	N/A (Tell us)
Material	6061 Aircraft aluminum
Solderless/wireless	Yes
Button placement	Side
Supplier(s)	Altsmoke , iVapour-Elixir , Electronic-Cigz
Video(s)	damulta, GrimmGreen

Read more about this mod >>

Nothing too fancy, stylish battery tube mod made out of stainless steel. Optional brass end/bottom caps (+$5). In addition to the 3.7V setup, you can also use 2x CR123A for a 6V vape. Sold by user peaceoffcake at VapersForum.com. Although sold on a US based forum, this unit is shipped from Croatia.

Made in	Croatia
Manufacturer	peaceoffcake
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Stainless steel
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	peaceoffcake (VF)
Video(s)	N/A (Tell us)

Read more about this mod >>

Available in 3.7V and 5V versions. 5V version is $30 extra and uses 2x 16340 batteries. Can be purchased as a full kit only.

Made in	USA
Manufacturer	Metro Vapor
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Top
Supplier(s)	Metro Vapor
Video(s)	GrimmGreen

Read more about this mod >>

Blue Lightning is an acrylic tube mod by Cigtechs. It runs on either one 14500 battery (3.7V) or two 15270 (6V) batteries and uses 510 atomizers.

Made in	USA
Manufacturer	Cigtechs
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Cigtechs
Video(s)	N/A (Tell us)

Read more about this mod >>

BombShell is a HotVapes exclusive tube mod very similar to the original Silver Bullet. It uses either a single 18650 3.7V battery or two 3V CR123A’s. The body is made out of aluminum and it has a recessed brass button. Venting hole at the bottom as a safety feature. Five colors available.

Made in	USA
Manufacturer	Hotvapes
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Hotvapes , ECigWizard (10% discount code: esavuke)
Video(s)	N/A (Tell us)

Read more about this mod >>

Previously called the Bulli Big.

Made in	Germany
Manufacturer	Bulli-Smoker
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Bulli-Smoker , Electro Fampfre
Video(s)	N/A (Tell us)

Read more about this mod >>

No description available.

Made in	Germany
Manufacturer	Bulli-Smoker
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Bulli-Smoker
Video(s)	N/A (Tell us)

Read more about this mod >>

No description available

Made in	Germany
Manufacturer	Bulli-Smoker
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Bulli-Smoker , Smokejuice
Video(s)	MUFFTRIX, dumwaldo

Read more about this mod >>

“The elegantest of the Bulli-Smokers.”

Made in	Germany
Manufacturer	Bulli-Smoker
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Bulli-Smoker , Smokejuice
Video(s)	ooOOFragileOOoo

Read more about this mod >>

First commercial mod with an adjustable voltage without battery change. Built-in safety mechanism. Low battery indicator and shutdown. Built out of 6061 aircraft quality aluminum. Dual color LED for activate and low battery. This truly sounds like the next generation PV, hope it does all the things it promises.

Made in	USA
Manufacturer	NotCigs
Dimensions	4.1″ x 0.87″
Weight	2oz
Material	6061 Aircraft aluminum
Solderless/wireless	No
Button placement	Side
Supplier(s)	NotCigs
Video(s)	AmajNN, GrimmGreen

Read more about this mod >>

Starter kit comes with everything you need to start vaping. DSE-801, DSE-901 and Joye510 adapters + atomizers are also included making the starter kit great value for money. CR123A extension can be purchased separately. Called Chameleon in the US and Kameleon in Europe.

Made in	N/A (Tell us)
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	Yes
Button placement	Side
Supplier(s)	Ikenvape , PartySmoker , Partynebula
Video(s)	iken2punk, GrimmGreen

Read more about this mod >>

The specialty of this mod is that it can be completely customized with graphics the buyer provides. See the manufacturers homepage for examples. Mod is completely made out of brass and copper while most mods are made out of aluminum. New units will now come with a vented tail cap.

Made in	USA
Manufacturer	ThagBuilt
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Brass/Copper
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	ThagBuilt
Video(s)	moobyghost, Hyperdeficit, DoctorVapor

Read more about this mod >>

The Original Copper mod. Despite it’s name the mod is complete made out of brass. The device has no button, atomizer is activated by pressing it downwards. Protected batteries do fit. 2 CR2 batteries can be used to archieve 6 Volts.

Made in	USA
Manufacturer	VaporAlley
Dimensions	3.5″ x 1″
Weight	4.7oz
Material	Brass
Solderless/wireless	Yes
Button placement	Top (Activated by pressing the atomizer down)
Supplier(s)	VaporAlley
Video(s)	dumwaldo, GrimmGreen

Continue reading »

Polished and rounded Copper works exactly as the original Copper but it has a rounded, smoother design. Protected batteries do fit. 2 CR2 batteries can be used to archieve 6 Volts.

Made in	USA
Manufacturer	VaporAlley
Dimensions	3.5″ x 7/8″
Weight	4.1oz
Material	Brass
Solderless/wireless	Yes
Button placement	Top (Activated by pressing the atomizer down)
Supplier(s)	VaporAlley
Video(s)	dumwaldo, GrimmGreen

Continue reading »

Rounded 2 (or R2)  Copper is just a cosmetic change to the rounded 1 model. Has exactly the same functions and specs as the original Copper. Protected batteries do fit. 2x CR2 batteries can also be used for a 6.0 Volt vape.

Made in	USA
Manufacturer	VaporAlley
Dimensions	3.5″ x 7/8″
Weight	3.8oz
Material	Brass
Solderless/wireless	Yes
Button placement	Top (Activated by pressing the atomizer down)
Supplier(s)	VaporAlley
Video(s)	dumwaldo, GrimmGreen

Continue reading »

There are three different versions of the Cumulus available. 3.7V, 5V and 6V. 3.7V version uses a single 14500 battery and the high voltage models use two 16340 batteries. 3.7V version is a bit cheaper than the other two. It’s a rather strange looking tube mod but the unit in the picture is just a prototype.

Made in	USA
Manufacturer	N/A (Tell us)
Dimensions	4″
Weight	3oz
Material	N/A (Tell us)
Solderless/wireless	No
Button placement	N/A (Tell us)
Supplier(s)	eCigMods
Video(s)	N/A (Tell us)

Read more about this mod >>

The Dragon by ePipeMods is a unique, handcarved electronic pipe. The Dragon is only available as a custom order. Each pipe is teak oiled and wax polished for a beautiful finish. The Dragon runs on one 26650 (4000mAh) monster battery and uses 510 atomizers. It has a built-in 10ml e-liquid tank with bottom feeding function. At the moment there are 8 different designs to choose from.

Made in	USA
Manufacturer	ePipeMods
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Wood
Solderless/wireless	N/A (Tell us)
Button placement	Top
Supplier(s)	ePipeMods
Video(s)	N/A (Tell us)

Read more about this mod >>

E-cig manufacturer Sailebao has also made a mod-type of device for the mass market. Has been criticized a lot about it’s looks as it’s very similar to Trogs original Screwdriver. Has a side-switch and a separate kill-switch at the bottom. Make sure you get the latest V3 version which has the faults fixed discovered in the previous versions. If you buy this mod from Liberty Flights UK, use the code esavuke for a 10% discount.

Made in	China
Manufacturer	Sailebao
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	No
Button placement	Side
Supplier(s)	eSmokeClub , Liberty Flights Ecigsupply , Sublime Vapours
Video(s)	gpalmer1234, igetcha69, GrimmGreen

Continue reading »

The Empire MOD is the first custom device by Empire Mods. This all mechanical mod is made in the USA. The design goes hand in hand with the same companys drip shield. In fact the drip shields were originally designed to be used with this device. By adjusting the height of the center tube you can use almost any single battery with the Empire from 16340 to 18650. Has threading for 901 atomizers but comes with a 510 adapter. Also features a switch locking function, interchangeable anodized color sleeves, venting holes and custom made Delrin stand (Tranquility Base).

Made in	USA
Manufacturer	Empire Mods
Dimensions	N/A (Tell us)
Weight	43g
Material	20/24 Aircraft aluminum
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Empire Mods
Video(s)	N/A (Tell us)

Read more about this mod >>

The Bent Pipe from ePipeMods is the first USA made electronic pipe. Each pipe is a unique, handcarved work of art. Each pipe is teak oiled and wax polished for a beautiful finish. The Pipes operate with one 18350 or 16340 battery at 3.7 Volts. Compatible with 510 threaded atomizers. There are literally dozens of different designs to choose from.

Made in	USA
Manufacturer	ePipeMods
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Wood
Solderless/wireless	N/A (Tell us)
Button placement	Top
Supplier(s)	ePipeMods
Video(s)	N/A (Tell us)

Read more about this mod >>

Galileo is a Italian made mod with very versatile battery and atomizer options. All-aluminum body, telescopic design, will take almost any battery except 10440.  5 Atomizer adaptors included so it can be used with almost any atomizer available. I Can’t quite understand the Italian description but it says something about changing the voltage, my guess is that this is done by changing/stacking the batteries but I might be wrong.

Made in	Italy
Manufacturer	Yasu75
Dimensions	70-104mm x 25mm
Weight	1.59oz (45g)
Material	Aluminum
Solderless/wireless	No/Yes
Button placement	Bottom
Supplier(s)	eSigShop
Video(s)	N/A (Tell us)

Read more about this mod >>

Stylish aluminum mod with brass end caps. Solid brass version also available. Lockable switch.

Made in	Greece
Manufacturer	Imeo
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum/Brass
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Vaporkings , e-cigz.co.uk
Video(s)	cwazydrummerkid

Read more about this mod >>

Very stylish european made mod. Made out of aluminum and brass. Mod has a telescopic design that allows the use of virtually any battery combination (of common mod batteries) but is also one of the most expensive mods yet. Lockable switch. Starter pack comes with KR808D1/DSE-901, Joye510 and DSE-801 adapters.

Made in	Greece
Manufacturer	Imeo
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum/Brass
Solderless/wireless	Yes
Button placement	Side
Supplier(s)	Vaporkings , e-cigz.co.uk
Video(s)	MrNYFC, cwazydrummerkid

Read more about this mod >>

GGTB (Telescoping Battery Golden Greek) is a smaller and more affordable version of the GGTS. It also has most of the features of it’s predecessor. You can’t adjust the length of the device itself but you can adjust the length of the batteries it accepts with a telescoping dummy battery piece (included). By changing the batteries you can adjust the voltage from 3.7V to 7.4V. Several different finishes are available including aluminum, brass, nickel matte and nickel shiny. The mod has venting holes and a locking button. Compatible batteries: 2 X CR2, 2 X 16340, 2 X 17340, 1 X 14500, 1 X 14650, 1 X 17500, 1 X 17670.

Made in	Greece
Manufacturer	Imeo
Dimensions	3.94″ x 0.75″ (100mm x 19mm)
Weight	2.36oz (67g)
Material	Aluminum
Solderless/wireless	Yes
Button placement	Side
Supplier(s)	GG Ecigs , Vaporkings , e-cigz.co.uk
Video(s)	N/A (Tell us)

Read more about this mod >>

Available in metallic or black colour. You can choose between 3 different voltages. All use the same batteries but 3.6V and 5V versions come with a resistor to lower the voltage.

Made in	USA
Manufacturer	Great Lakes Vapor
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Top
Supplier(s)	GreatLakesVapor
Video(s)	N/A (Tell us)

Read more about this mod >>

The GLV-3 by Great Lakes Vapor is a tube/box hybrid. You can use the tube part – which is the actual device – with or without the juice feeder (box part). The box part houses a 10ml liquid bottle which feeds liquid via top or bottom. Internal mechanism does the bottom-feeding, you’ll need to install a custom tip for top-feeding. All in all, this is quite unique system at the moment. You can choose 510, 901 or 801 threading. There are three voltage models available 3.7V, 5V and 6V. GLV-3 uses two CR123A batteries, 3.6V and 5V versions come with an resistor installed. Total of eleven different metallic finishes, clear coating and laser etching available. Mini version comes with a 5ml juice bottle and uses one CR123A battery.

Made in	USA
Manufacturer	Great Lakes Vapor
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Top
Supplier(s)	Great Lakes Vapor
Video(s)	N/A (Tell us)

Read more about this mod >>

Goldrush is an acrylic tube mod by Cigtechs. It runs on either one 18650 battery (3.7V), two 16340 (6V) or two 18350 (7.2V) batteries and uses 510 atomizers. You could call this the big brother to the Blue Lightning.

Made in	USA
Manufacturer	Cigtechs
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Cigtechs
Video(s)	N/A (Tell us)

Read more about this mod >>

H2V2 is a second generation model of the original Hex Copper. The Main difference is that it uses larger capacity batteries for longer vapes. 17670 battery is used for 3.7V vaping and two CR123A’s are used for high voltage vaping. Protected batteries will fit in this device. Although larger in size, H2V2 is actually lighter than the original.

Made in	USA
Manufacturer	VaporAlley
Dimensions	4″ x 1″
Weight	4.1oz
Material	Brass
Solderless/wireless	Yes
Button placement	Top (Activated by pressing the atomizer down)
Supplier(s)	VaporAlley
Video(s)	N/A (Tell us)

Continue reading »

The Helix is designed and manufactured by the famous modder Cisco. Helix is powered by the monster 26650 battery which has a capacity of 4000mAh! No other mod uses this battery yet. You could vape a whole 30ml bottle of e-liquid before the battery runs out. Helix has a fully mechanical custom button and comes with 510 threading. You’ll also get an internal battery reduction sleeve which will allow you to use a single 18650 battery (3.7V) or two 16340/CR123A batteries (6V). Two finishes to choose from: matte black or polished aluminum. Also features: Helix logo carved to the bottom of the unit, end cap has grooves for better grip and juice well to catch leaking e-liquid. Only limited quantities available so get yours while you can.

Made in	USA
Manufacturer	Cisco
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	Yes
Button placement	Side
Supplier(s)	eLiquidPlanet
Video(s)	MyPuterGeek

Read more about this mod >>

This mod is designed to replace the Puresmoker Protege. With satin stainless steel or media blasted stainless steel finish.

Made in	USA
Manufacturer	PureSmoker
Dimensions	3.35″ x .659″
Weight	78g
Material	Stainless steel
Solderless/wireless	N/A (Tell us)
Button placement	Bottom
Supplier(s)	Puresmoker , Cloud9Vaping
Video(s)	N/A (Tell us)

Read more about this mod >>

Chinese-made, medium sized mod but can be used as a 6V device with an extension sleeve (2x CR123A 6V batteries needed). KR808D1/DSE-901, 40X, Joye510 and DSE-801 adapters are all included in the starter kit. A passthrough add-on can be purchased separately ($10.50).

Made in	China
Manufacturer	Wenzhou Fanxiang International Trade Co., Ltd.
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Eastmall , Vaporescence
Video(s)	Thehifistud, 77fro

Read more about this mod >>

The Infinity ∞ from Notcigs.com is a new variable voltage personal vaporizer in a sleek new design , it uses 2x 14430 protected rechargeable batteries and can be adjusted from 3 to 6 volts with just your thumb. Regulated voltage plus over temp and current protection. This new design has taken variable voltage to the next level of ease and comfort , it is a small elegant design  that can be taken anywhere and look good.  The ∞ comes in 3 colors Black , Brass and Chrome with either Chrome or brass top and bottom caps for a beautiful looking PV.

Made in	USA
Manufacturer	Notcigs
Dimensions	4.5″ x 0.67″
Weight	2oz
Material	N/A (Tell us)
Solderless/wireless	No
Button placement	Side
Supplier(s)	Notcigs
Video(s)	N/A (Tell us)

Read more about this mod >>

Jazz is an electronic pipe. The Jazz body is made out of wood and it houses one 3.7V 18350 or CR123A battery. You can use either a 510 or a 808D cartomizer (regular or xl) with it. You can choose a light or dark finish on the wood.

Made in	USA
Manufacturer	G.A. TECH
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Wood
Solderless/wireless	N/A (Tell us)
Button placement	Top
Supplier(s)	Jazz Cartopipe
Video(s)	N/A (Tell us)

Read more about this mod >>

Joker with variable voltage is only 0.6 inches longer than the regular unit. Voltage can be adjusted from 3.6V to 6V with a screwdriver. Features include LED battery indicator, short circuit protection and thermal shutdown protection.

Made in	USA (New York)
Manufacturer	Vaprlife
Dimensions	4.7″ x 0.74″
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	No
Button placement	Side
Supplier(s)	Vaprlife
Video(s)	step07226

Read more about this mod >>

Latest creation from Vaprlife is a 5 Volt device with led-lights, charge level-light and lots of color options.

Made in	USA
Manufacturer	Vaprlife
Dimensions	4.25″ x 0.74″
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	No
Button placement	Side
Supplier(s)	Vaprlife
Video(s)	ChrisFromCali

Read more about this mod >>

Smaller version of the Chuck. The specialty of this mod is that it can be completely customized with graphics the customer provides. See manufacturers homepage for examples. Mod is completely made out of brass and copper while almost every other mod is made out of aluminum. New units will now come with a vented tail cap.

Made in	USA
Manufacturer	ThagBuilt
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Brass/Copper
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	ThagBuilt
Video(s)	mamacats73, cwazydrummerkid, hermyish

Read more about this mod >>

e-CigCitys latest creation is an affordable mod with 2 voltage options. Led-light color can be chosen and the starter pack comes with everything you need to start using it. Possible battery combinations are 1x 10440 3.7V, 1x 14500 3.7V or 2 x CR2 6V.

Made in	UK
Manufacturer	e-CigCity
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Bottom
Supplier(s)	e-CigCity
Video(s)	garrydibley01, SteveMontuno

Read more about this mod >>

It’s basically the same as the original Little Gem but the switch is on the side rather than on the bottom hence the extra name, sidewinder. Possible battery combinations are 1x 10440 3.7V, 1x 14500 3.7V or 2 x CR2 6V.

Made in	UK
Manufacturer	e-CigCity
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	LF
Video(s)	N/A (Tell us)

Continue reading »

The Mako is one of the first PV’s to be solely designed, engineered, produced and assembled in the UK. Maksi is the “Sweet Spot” Mako. Add-on sleeve can be bought separately to make it a Minno/Midi.Features include a lockable switch and a adjustable atomizer connection. The New version 2 also has an adjustable switch throw.

Made in	UK
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Moju Republic , ElectroNicStix
Video(s)	smokejuice, svendsen82

Read more about this mod >>

The Mako is one of the first PV’s to be solely designed, engineered, produced and assembled in the UK. Mako Midi is the dual voltage all-rounder. Add-on sleeve can be bought separately to make it a Minno/Maksi. Features include a lockable switch and a adjustable atomizer connection. 2x CR2 batteries can be used for a 6V vape. The New version 2 also has an adjustable switch throw.

Made in	UK
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Moju Republic , ElectroNicStix
Video(s)	smokejuice, svendsen82

Read more about this mod >>

The Mako is one of the first PV’s to be solely designed, engineered, produced and assembled in the UK. The tiny Minno is the smallest of the Mako family. Add-on sleeve can be bought separately to make it a Midi/Maksi. Features include a lockable switch and a adjustable atomizer connection. The New version 2 also has an adjustable switch throw.

Made in	UK
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Moju Republic , ElectroNicStix
Video(s)	smokejuice, svendsen82

Read more about this mod >>

As the name suggests, Me.Ca Monster by Bauway (model BW-155D) is the largest mod by the Chinese yet. Although it looks like an eGo which runs on a custom battery, Me.Ca uses a replaceable stock 18650 (3.7V) battery. It’s compatible with DSE-801 threaded atomizers.

Made in	China
Manufacturer	Bauway
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	CDNVapor
Video(s)	N/A (Tell us)

Read more about this mod >>

Megalodon or simply “The Don” is a telescoping all mechanical and all aluminum tube mod or “electronic nicotine vaporiser” as they call it. Fully extended it can take a 18650 battery for a full day 3.7V vape.  Other possible single battery possibilities are 18350, 17670, 14650, 16340 and CR123A. If you need higher voltage you can also use two CR123A or 16340 batteries. Theres also a custom 5V battery compatible with the Don available.

Made in	UK
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Moju Republic , Electronicstix
Video(s)	smokejuice

Read more about this mod >>

Bob Meucci, better known for his premier custom pool cues has created this beatiful exclusive designed PV. At some point, Mad Hatter Cig was involved somehow in the production process but later all references to this product were removed from their website. Meucci Moochie electronic cigarette (formerly known as Meucci Vapor Cue) prices range from $160 to $300 and the designs are absolutely beautiful. You can choose a standard (5 7/8″ x 1 1/4″) or mini (4 5/8″ x 1″) size.

Made in	USA
Manufacturer	Meucci Cues
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Meucci Cues
Video(s)	N/A (Tell us)

Read more about this mod >>

Midi Vapestack is the newest mid-sized tube mod from MadVapes. Made out of aircraft grade aluminum. Midi VapeStack comes with a bonus matching aluminum drip tip.

Made in	USA
Manufacturer	MadVapes
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	No
Button placement	Top
Supplier(s)	MadVapes
Video(s)	N/A (Tell us)

Read more about this mod >>

Mini Copper is a shorter version of the original Copper -mod, it comes with Joye510-threading. The device has no button, atomizer is activated by pressing it downwards. Protected batteries do fit.

Made in	USA
Manufacturer	VaporAlley
Dimensions	3.0″ x 7/8″
Weight	3.2oz
Material	Brass
Solderless/wireless	Yes
Button placement	Top (activated by pressing the atomizer downwards))
Supplier(s)	VaporAlley
Video(s)	GrimmGreen, muldrick

Continue reading »

A Compact, completely sealed battery tube mod made out of aircraft grade aluminum. 4 colours available. Comes with a aluminum dripping tip with matching color. Protected batteries do fit and the device also has safety vents on the bottom.

Made in	USA
Manufacturer	MadVapes
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	N/A (Tell us)
Button placement	Top
Supplier(s)	MadVapes
Video(s)	N/A (Tell us)

Read more about this mod >>

Can also be run on 6 Volts by using 2 CR2 batteries.

Made in	N/A (Tell us)
Manufacturer	Vapor Sabre
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	The Vapor-Sabre
Video(s)	N/A (Tell us)

Read more about this mod >>

OmeGa is a improved/altered version of the original AltSmoke Silver Bullet. Slightly smaller and with a top button activated by hand or mouth. Constructed from 6061 aircraft aluminum. tapered for comfort and grip. Nickel plated for a more durable finish. Can be run on 6 Volts by using 2x CR123A batteries.

Made in	USA
Manufacturer	AltSmoke
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	6061 Aircraft aluminum
Solderless/wireless	Yes
Button placement	Top (Activated by pressing the top part downwards)
Supplier(s)	Altsmoke , iVapour-Elixir , Electronic-Cigz
Video(s)	capt12b, romastino

Read more about this mod >>

Pearl has pretty much the same design as all previous Vaprlife models. There are two different versions available. Pearl-FV (Fixed Voltage) is a 5V device andPearl-AV (Adjustable Voltage) is a variable voltage device. You can adjust the AVs voltage from 3.7V to 6V. They both use two 15270 batteries and also work as a 3.7V device by simply using one 14500 battery.

Made in	USA
Manufacturer	Vaprlife
Dimensions	4.2″ x 0.7″
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	No
Button placement	Side
Supplier(s)	Vaprlife
Video(s)	N/A (Tell us)

Read more about this mod >>

Phantom TT Twinbooster is a dual atomizer (510) tube mod. It comes with a custom machined mouthpiece to join the two atomizers. Also features a master on/off switch and the ability to replace the tube to use either a 18650 battery or a smaller 16340 battery. Each unit comes unique numbered.

Made in	Germany
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	No
Button placement	Side
Supplier(s)	Highendsmoke
Video(s)	N/A (Tell us)

Read more about this mod >>

Simple looking and affordable battery tube mod made out of stainless steel. Sold by user peaceoffcake at VapersForum.com. Although sold on a US based forum, this unit is shipped from Croatia.

Made in	Croatia
Manufacturer	peaceoffcake
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Stainless steel
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	peaceoffcake (VF)
Video(s)	N/A (Tell us)

Read more about this mod >>

Precious L is claimed to be the smallest mod using 18650 battery yet. Activated by a pocket-safe, touch activated sensor. Also claims to feature variable power based on touch surface but i don’t know how this actually works. Under voltage protection and venting holes at the bottom. Made out of high quality nickel plated brass. Protected batteries do fit.

Made in	Romania
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Brass
Solderless/wireless	Yes
Button placement	Side
Supplier(s)	Precious
Video(s)	angelos714

Read more about this mod >>

Precious M is claimed to be the smallest mod using 14500 battery yet. Activated by a pocket-safe, touch activated sensor. Also claims to feature variable power based on touch surface but i don’t know how this actually works. Under voltage protection and venting holes at the bottom. Made out of high quality nickel plated brass. Protected batteries do fit.

Made in	Romania
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Brass
Solderless/wireless	Yes
Button placement	Side
Supplier(s)	Precious
Video(s)	N/A (Tell us)

Read more about this mod >>

Precious S is claimed to be the smallest mod using 10440 battery yet. Activated by a pocket-safe, touch activated sensor. Also claims to feature variable power based on touch surface but i don’t know how this actually works. Under voltage protection and venting holes at the bottom. Made out of high quality nickel plated brass. Protected batteries do fit.

Made in	Romania
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Brass
Solderless/wireless	Yes
Button placement	Side
Supplier(s)	Precious
Video(s)	N/A (Tell us)

Read more about this mod >>

Precise 10440 (previously called the Mini-T) has now replaced all previous SuperTManufacturing models. 10440 version was the first being released in the series and was then called simply “The Precise”. Now also 18650 and 16340 models are available. Has a stainless steel body and either steel or brass end caps/button can be chosen by the customer. Adjustable button for throw and spring rate. Comes with Joye510 threading and adapters for DSE-801 and DSE-901 atomizers are included.

Made in	USA
Manufacturer	SuperTManufacturing
Dimensions	3.27″ x 0.47″
Weight	N/A (Tell us)
Material	Stainless steel/Brass
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	SuperTManufacturing
Video(s)	GrimmGreen, jaidexl

Read more about this mod >>

Precise 16340 runs on a single 16340 battery (3.7V). It’s completely machined out of scratch and corrosion resistant stainless steel but optional brass caps are available. Lifetime warranty (except the caps which have a 6 month warranty). Other features include a recessed atomizer connection with a juice well, completely sealed design plus a semi-recessed and shielded button.

Made in	USA
Manufacturer	SuperTManufacturing
Dimensions	2.91″ x 0.73″
Weight	N/A (Tell us)
Material	Stainless steel
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	SuperTManufacturing
Video(s)	N/A (Tell us)

Read more about this mod >>

Precise 18650 is the largest of the trio. It runs on a single 18650 battery (3.7V) or 2x CR123A (6V) batteries. All Precise models are completely made out of scratch and corrosion resistant stainless steel but optional brass caps are available. Lifetime warranty (except the caps which carry a 6 month warranty). Other features: completely sealed design plus a semi-recessed and shielded button, recessed atomizer connection with a juice well.

Made in	USA
Manufacturer	SuperTManufacturing
Dimensions	4.09″ x 0.79″
Weight	N/A (Tell us)
Material	Stainless steel
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	SuperTManufacturing
Video(s)	N/A (Tell us)

Read more about this mod >>

In V3, the mid-tube button (V1 & V2) has been replaced with a mechanical and lockable bottom button. Also the voltage resistor has been removed to make it a real 6V “high voltage” device. This seems strange to me as 5 volts was one of the selling points of the original unit.

Made in	USA
Manufacturer	Puresmoker
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	Yes
Button placement	Bottom
Supplier(s)	Puresmoker , Cloud9Vaping
Video(s)	N/A (Tell us)

Read more about this mod >>

Provape-1 is a very stylish 3.7V device from ProVape. In addition to the metallic (pictured), a black, pink or blue color can be chosen. Features include: 16 Second Safety Cutoff, Short Circuit Protection, Reverse Battery Protection, Thermal Monitoring System, Amperage Limiting, 24/7 Fail Safe Monitoring Circuit, Venting holes for added safety. Lifetime warranty plus a 7-day satisfaction guarantee.

Made in	USA
Manufacturer	Provape
Dimensions	3.8″ x 0.75″
Weight	78g
Material	Stainless steel
Solderless/wireless	No
Button placement	Side
Supplier(s)	Provape
Video(s)	AmajNN, kimsalamone, crashtestjeep

Read more about this mod >>

ProVari Variable Voltage mod is the second e-cig device from ProVape. The first mod to feature a single battery buck/boost circuit offering a variable voltage range of 3.3 – 6 volts. You can change the voltage with just a few button presses, no screwdriver needed. Voltage stays the same regardless of the battery power left (regulated voltage). This model will work with a single 18490 battery (AW 1100mah high drain recommended). You can also use a regular 18500 battery but with a limited voltage range  or a 18650 battery with an extension cap. Single battery designs are much safer than stacked batteries and will out perform stacked battery devices. ProVari features: Microprocessor controlled variable voltage from 3.3V to 6V (.1 volt increments), built-in display and translucent light-up pushbutton with low battery indicator, 16 seconds safety cut-off, venting system, short circuit and reverse battery protection, thermal monitoring system, amperage limiting, battery monitor and over-discharge protection. Now available with polished chrome or texture black finish and special collector’s edition end caps. Latest limited edition finish is the beautiful 24 carat gold one (see below).

Made in	USA
Manufacturer	Provape
Dimensions	4.1″ x 0.90″
Weight	3.5 ounces
Material	Stainless steel
Solderless/wireless	No
Button placement	Side
Supplier(s)	Provape
Video(s)	N/A (Tell us)

Continue reading »

Q2V3 Copper is the new model for 2011. It’s slightly larger than the previous models using a 17670 (3.7V) battery or two 16340 batteries (6V). Even though it’s longer than the original Hex copper it doesn’t carry as much weight. Q2V3 is the most comfortable Copper yet due to its rounded quadratic end caps and softly textured body.

Made in	USA
Manufacturer	VaporAlley
Dimensions	4″ x 1″
Weight	4.1oz
Material	Brass
Solderless/wireless	Yes
Button placement	Top (Activated by pressing the atomizer down)
Supplier(s)	VaporAlley
Video(s)	N/A (Tell us)

Continue reading »