Cartridge and Atomizer Mods

ARRY by ECigWizard is a 5ml liquid tank. It uses the internals of a CE2 R5 Clearomiser. So you get the exceptional performance of a R5 Clearomizer with a 5ml e-liquid tank. Main body of the ARRY Tank is made of strong 3mm polycarbonate. End caps are made of hard acetel which is also more durable than the more common delrin. You can purchase a tank with or without the internals installed. ARRY Tank can be used with any e-Cigarette mod that has a 510 connection. Use coupon esavuke and save 10%.

Made in	N/A (Tell us)
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Polycarbonate / Acetel
Solderless/wireless	Yes
Button placement	No Button
Supplier(s)	ECigWizard (10% off using coupon esavuke)
Video(s)	N/A (Tell us)

Read more about this mod >>

The German made A1 atomizer by Bulli-Smoker is the first custom made atomizer that can be easily taken apart and repaired. It comes with one meter of extra heatwire and glassfiber. The A1 model also has a 70 drop (about 7ml?) liquid container.  Compatible with all A1 Bulli-Smoker mods only. Engraving available for an extra charge.

Made in	Germany
Manufacturer	Bulli-Smoker
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	N/A (Tell us)
Supplier(s)	Bulli-Smoker
Video(s)	N/A (Tell us)

Read more about this mod >>

The A2 atomizer from Bulli-Smoker is the first custom made atomizer that can be easily taken apart and repaired. It comes with 1 meter of extra heatwire and glassfiber. Available with 510, 801 or 901 connection.

Made in	Germany
Manufacturer	Bulli-Smoker
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum or Stainless steel (+5€)
Solderless/wireless	N/A (Tell us)
Button placement	N/A (Tell us)
Supplier(s)	Bulli-Smoker
Video(s)	N/A (Tell us)

Read more about this mod >>

The Clouds of Vapor Voltage Meter add-on is compatible with any 510 mod. Three digit led display shows the current voltage with accuracy of .005 Volts. Shows voltage out of the battery when atomizer is not attached and voltage under load when atomizer is attached. Update interval of 2 seconds, reads voltages between 2.8 and 25.2.

Made in	USA
Manufacturer	Clouds of Vapor
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	No button
Supplier(s)	Clouds of Vapor
Video(s)	N/A (Tell us)

Read more about this mod >>

Drip Shields by Empire Mods are simply designed to prevent the DSE-901 atomizer from leaking. For me the description on their website is very confusing. Apparently you just slide the whole thing over your already connected atomizer and thats it. There are o-rings inside the shield to keep it tight and air holes on the top side. Can be used with 510 atomizers also by using a adapter. Available in many colors and finishes.

Made in	USA
Manufacturer	Empire Mods
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	N/A (Tell us)
Button placement	N/A (Tell us)
Supplier(s)	Empire Mods
Video(s)	N/A (Tell us)

Read more about this mod >>

Drip Tip is a mouthpiece you can drip through without removing it. It is a mouthpiece only, this cartridge has no e-liquid container. Most drip tips are now manufactured in China but the original design came from SuperTManufacturing.  Drip Tips can be made out of plastic, delrin, steel or aluminum. Colors range from plain metal to crazy twisted multi colored ones. There are propably many Chinese manufacturers making these and there’s so many design, material and color options so i’m only going to post this one entry for drip tips in general. You can get a drip tip compatible with almost every atomizer model out there.

Made in	China
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	Yes
Button placement	N/A (Tell us)
Supplier(s)	Provape , eSmokeClub , Totally Wicked , eLiquid Planet , Health Cabin , AltSmoke , Heaven Gifts , NHaler
Video(s)	XenoVape

Read more about this mod >>

The Fog is a liquid tank which integrates with a regular or low resistance DSE-901 atomizer. Sold exclusively at the Greek Funstore. To see how it works, please see an instructional video at their website. Features: 3.5ml liquid tank, compatible with all eGo batteries and all chrome parts. Although it looks like a full working mod in the picture, it’s actually just the cartridge part.

Made in	Greece
Manufacturer	N/A (Tell us)
Dimensions	14mm x 75mm
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	N/A (Tell us)
Supplier(s)	Funstore.gr
Video(s)	N/A (Tell us)

Read more about this mod >>

The re-designed AFS v2 features a 6ml liquid container with automatic feeding system and adjustable air-flow. V2 can be attached to any mod. Only works with custom DSE brand 901 atomizer (1 included). Comes with a custom plastic mouth-piece.

Made in	Greece
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Solderless/wireless	Yes
Suppliers	Vaporkings
Reviews	N/A (Tell us)

Read more about this mod >>

Glass Tips by Open Lab Glass are drip tips made out of – yes you’ve guessed it – colored art glass. Many unique designs available. No prices on their website…

Made in	USA
Manufacturer	Open Lab Glass
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Glass
Solderless/wireless	N/A (Tell us)
Button placement	No button
Supplier(s)	Open Lab Glass
Video(s)	N/A (Tell us)

Read more about this mod >>

These affordable Titan/Tornado adaptors replace the atomizer with a laser pointer or a led light. Adaptors are compatible with all 3.7V Joye510 threaded batteries. Normal e-cigarette functionality is not possible while using the adaptors.

Made in	N/A (Tell us)
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	N/A (Tell us)
Supplier(s)	Totally Wicked , Totally Wicked
Video(s)	N/A (Tell us)

Read more about this mod >>

The Map Tank is a see-through liquid container / feeder compatible with all 510 threaded devices. There are many variations of this device available. The regular tank will hold 5ml’s of juice and the Mega version will hold 12ml’s. Both versions also come with three different resistances to chooce from: 2.4ohm, 2.8ohm and 3.2ohm. Map Tank E2 is made out of delrin / lexan and is re-fillable. You can use a 510/901 driptip as a mouthpiece.

Made in	N/A (Tell us)
Manufacturer	N/A (Tell us)
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Delrin / Lexan
Solderless/wireless	N/A (Tell us)
Button placement	N/A (Tell us)
Supplier(s)	Clouds of Vapor
Video(s)	N/A (Tell us)

Read more about this mod >>

RES or Reservoir Expansion System is a liquid tank add-on for the Apex Alpha mods. Unlike any other e-liquid tank or atomizer, RES uses a medical device grade ceramic wick that holds the e-liquid so you shouldnt taste anything else but the liquid itself. The tank can be filled simply by dripping through the atomizer and the e-liquid reserved in the wick is fed back up to the atomizer by the airflow you create. You can also cempletely remove the ceramic wick and then soak the liquid to it. There is a different capacity RES for all three Alpha units. Ultralite RES can hold 0.5ml of e-liquid, Ultra 1ml and UltraMax 2ml. RES replaces the whole atomizer interface on the Alpha mod for a precision fit and compact size. RES and the Alpha version its made for have exactly the same width. Check Innovapor for pricing and use the code “esavuke” for a whopping 20% discount.

Made in	USA
Manufacturer	Apexvapor
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	6061 Aircraft aluminum
Solderless/wireless	Yes
Button placement	No button
Supplier(s)	Innovapor (20% off using coupon esavuke)
Video(s)	N/A (Tell us)

Read more about this mod >>

T-Tip is a mod that replaces the whole stock e-cig cartridge. T-Tip has no liquid container so e-liquid can be dripped straight thru it. T-Tip is made out of brass or stainless steel (on the right) and is sealed with a rubber o-ring. New model is made out of Delrin (on the left) and it features a re-designed recessed funnel and large diameter entrance chamber to futher aid dripping.

Made in	USA
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Solderless/wireless	Yes
Suppliers	SuperTManufacturing
Reviews	GrimmGreen, GrimmGreen, gpalmer1234, step07726

Read more about this mod >>

Tru-Flow Drip Tips by Apexvapor are mainly designed for the Apex Ultra, Ultralite and UltraMax mods but they can be used with any device utilizing 510 or 306 atomizers. They are claimed to have the largest inner diameter so they have more room to drip through. Made out of nickel plated aircraft aluminum or heat resistant PTFE plastic. Perfect match for the Apex Alpha mods.

Made in	USA
Manufacturer	Apexvapor
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	6061 Aircraft aluminum
Solderless/wireless	Yes
Button placement	No button
Supplier(s)	Innovapor (20% off using coupon esavuke)
Video(s)	N/A (Tell us)

Read more about this mod >>

Gooseneck by Totally Twisted Texas is a flexible extension part for any device using 510 atomizers. The Gooseneck is designed to move the device you are using further away from your face as a safety feature. It also allows you to vape comfortably in various, otherwise awkward positions aswell.

Made in	N/A (Tell us)
Manufacturer	Totally Twisted Texas
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	No Button
Supplier(s)	TTT , Cloud 9 Vaping
Video(s)	N/A (Tell us)

Read more about this mod >>

VapeMate is the latest SuperTManufacturing innovation. VapeMate is an e-cigarette juice feeder compatible with any Joye510 or DSE-901 atomizer. Vape mate is constructed from one solid piece of aluminum and it features separate juice and air passages, a glass window to view the juice flow, easy screw-in bottle design and is drip tip compatible.

Made in	USA
Manufacturer	SuperTManufacturing
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Anodized aluminum
Solderless/wireless	Yes
Button placement	N/A (Tell us)
Supplier(s)	SuperTManufacturing
Video(s)	N/A (Tell us)

Read more about this mod >>

Zero Filler Mod is a plug that eliminates the need for a cart filler allowing better juice flow and larger capacity. Juice stays in contact with the atomizer bridge constantly and juice will flow as long as the atomizer can hold it. Different cut holes for different consistency e-liquids.

Made in	USA
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Solderless/wireless	Yes
Suppliers	ZFM
Reviews	N/A (Tell us)

Read more about this mod >>