Discontinued e-Cig Mods

The Basic model will use one CR123A battery, can be vaped at 6 Volts with a HVS add-on and 2x CR123A 6.0V or 2x CR2 6V batteries.

Read more about this mod >>

Robert, at NuVapor-forum, builds and sells these but the mod does not have a web site. Old models of this unit using unprotected batteries are considered to be unsafe. Design has since changed and will now use protected batteries.

Read more about this mod >>

Looks somewhat the same as some other laser pointer mods listed here but it uses a tru-MOSFET switch which apparently insures longer switch life and delivers maximum power to the atomizer.

Read more about this mod >>

Double Barrel (DBSB) add-on for the Silver Bullet mod enables the use of 2 atomizers simulatenously. Manufacturer recommends ONLY using 18650 batteries but 2 CR123A batteries will fit raising the Voltage up to 6. You will need the bottom part of a SB or you can buy one separately in order to make this a working unit.

Made in	USA
Manufacturer	AltSmoke
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	6061 Aircraft aluminum
Solderless/wireless	Yes
Button placement	Side
Supplier(s)	Altsmoke , iVapour-Elixir , Electronic-Cigz
Video(s)	dumwaldo, TheBearMXC

Read more about this mod >>

Very affordable flashlight-mod. Has a separate on/off switch. 2 CR2 batteries can be used for a 6 Volt vape.

Read more about this mod >>

A five volter with a trigger style switch. Made of 3/16″ machined acrylic from a single 1.5″ x 1.5″ block. Four different body styles and extended insurance available.

Read more about this mod >>

AFS is a liquid container that automatically feeds liquid into a modified atomizer. Comes with one modified RN-4075 or DSE-901 atomizer. AFS is intended to be used with the GG Transformer or the GG Telescopic.

Read more about this mod >>

2x CR2 batteries can be used for 6.0V vaping.

Read more about this mod >>

GG Super Slim is the thinnest (13mm) high voltage mod yet. It’s engineered from 7075 aluminium with brass accents. Lockable switch. Only use with HV atomizer.

Read more about this mod >>

No description available.

Read more about this mod >>

Available in metallic or black colour. You can choose between 3 different voltages. All use the same batteries but 3.6V and 5V versions come with a resistor to lower the voltage. I can’t really tell whats different between model 1 and 2 except the price.

Read more about this mod >>

Mass produced e-cig mod from Janty. Can be also used as a passthrough. Has a box-mod type design and a color changing led-ring.

Read more about this mod >>

Exactly the same device as the Janty Stick V2 but without the Janty-logo.

Read more about this mod >>

Extremely stylish and professional looking mod from France. Gold plated ring with serial number. Real anodized aluminium. Sold with or without led. Can also take 2x CR123A or 2x 16430 batteries for a 6 Volt vape.

Made in	France
Manufacturer	Kyozen
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	e-Cigarettes.fr
Video(s)	N/A (Tell us)

Read more about this mod >>

Affordable laser-pointer mod.

Read more about this mod >>

Equipped with a 1ml e-liquid container and a modded cart. Mod uses a custom 2800mAh battery which can be charged through USB-connection. I don’t know if this was ever publicly available for purchase so it’s now listed as discontinued.

Read more about this mod >>

AFAIK this is the first so called “box-mod”.

Read more about this mod >>

Rather unique looking mod. Looks like their NN 510 mod with some sort of liquid container and feeding system. Some pictures surfaced a long time ago but i have seen no progress since that so the mod is now listed as discontinued.

Read more about this mod >>

Box mod with a case made out of real wood! You can choose from 3 different types of wood. DSE-901/KR808, DSE-801 and 4081 adapters are included. Also one “Magnum” Joye510 (8 watt) atomizer is included. You can also use 2x CR123A batteries for a 6V vape.

Read more about this mod >>

One of the first e-cig mods to run at 5 Volts. According to the manufacturer, 5V is the “sweet spot” for vaping.

Read more about this mod >>

The new re-designed V2 has a mechanical switch and it’s also slightly smaller than the V1. V2 is also a 5V device only.

Read more about this mod >>

Threading can be changed with adapters to take either a Joye510, DSE-901 or DSE-801 atomizer. Adapters are compatible with the PS Passthrough. Latest model is version 1.1 which has some minor improvements compared to the original model.

Read more about this mod >>

Heavy duty 5 Volt passthrough. Atomizer adapters are compatible with the PS Protege.

Read more about this mod >>

Extremely stylish and professional looking mod from France. Real 5V regulated with component (3A @ 5V) and double side printed electronic circuit. Gold plated ring with serial number. Real anodized anuminium. Blue led ring on the switch.

Made in	France
Manufacturer	Kyozen
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	e-Cigarettes.fr
Video(s)	N/A (Tell us)

Read more about this mod >>

This is the original, wooden Reo. 3.7 Volt box mod with a casing made out of real wood. Many wood types and combinations can be chosen. Comes with adapter for Joye510, DSE-901 and DSE-801 atomizers.

Read more about this mod >>

Roughstack is a basic and affordable tube mod by Madvapes. It’s a 3.7V device using a 18350 battery.

Made in	USA
Manufacturer	Madvapes
Dimensions	N/A (Tell us)
Weight	N/A (Tell us)
Material	Aluminum
Solderless/wireless	N/A (Tell us)
Button placement	Side
Supplier(s)	Cigtechs , Madvapes
Video(s)	LeggoMyEars

Read more about this mod >>

The only commercial mod with two atomizers working simultaneously. 2x CR123A batteries can be used for 6V vaping.

Read more about this mod >>

A Box-mod with an invertible atomizer connection. Button can be secured by turning the atomizer over it. Mod takes a 3.7V 1000mAh custom battery also used in Canon cameras.

Read more about this mod >>

Looks very much the same as The BB-mod released earlier. 4 Metallic colors available.

Read more about this mod >>

Re-designed version of the original SuperT-mod. Now it’s possible to use different battery combinations without add-on parts and the unit is only slighty longer than the original model without the extension sleeve. Only DSE-801 version has the adjustable airflow feature.

Read more about this mod >>

SuperT introduced features that are now used in many e-cig mods. These include adjustable airflow, safety vents (in case of battery failure) and a lockable switch. CR2 batteries can only be used with a add-on sleeve. SuperT was also the slimmest mod using 16340 batteries when it was released.

Read more about this mod >>

Simplified version of the SuperT-mod. Only a very limited amount was ever released.

Read more about this mod >>

The Terminator is an universal add-on for all high voltage mods with 510 or 901 threading. The Whole system is built into a 901 atomizer tube and it will turn your regular HV mod into a variable voltage device. It will ofcourse make the atomizer part of the device a little longer. Voltage can be adjusted by simply turning a small screw on the side of the Terminator. Voltage range is from 3V all the way up to 6V depending on the batteries used.

Made in	USA
Manufacturer	Notcigs
Dimensions	1.5″ x 0.36″
Weight	N/A (Tell us)
Material	N/A (Tell us)
Solderless/wireless	N/A (Tell us)
Button placement	N/A (Tell us)
Supplier(s)	Notcigs
Video(s)	N/A (Tell us)

Read more about this mod >>

Looks exactly the same as the VP1 mod.

Read more about this mod >>

I Cannot find a retailer for this mod at the moment. ZiMoshi comes with DSE-801 threading.

Read more about this mod >>